Video Instructions: http://www.youtube.com/watch?v=yjkcpWD71cU
1. A 48 IR LED 420TV Line Waterproof Camera ( “Camera” http://www.tinydeal.com/w-p-8152.html)
2. A TV set with AV ports.
3.A “Male-to-Male” Composite RCA Cable ( “AV Cable” http://www.tinydeal.com/4-p-9151.html)
4. A “BNC Male” to “Phono RCA Female” Adapter ( “Adapter” http://www.tinydeal.com/h-p-19500.html)
Step 1: Connect the camera with the adapter — put the “BNC Male” end of the camera cable into the “BNC Male” end of the adapter.
Step 2: Insert the video plug (yellow) of the AV Cable into the RCA female port of the adapter.
Step 3: Connect the AV cable to your TV – you can find the right port by color.
Step 4: Connect the Camera to power. Now the CCTV system Has been done.
Oh, I forgot something. Before making up the CCTV system, you should install the camera in the position you like. Before installing, be sure that all power is cut.
Step 1: Install power source near the position for Camera. It’s better that power source is indoor even if the camera is to be installed outdoor, in case that others steel the power adapter or the power source get wet.
Step 2: Fix the base of the camera to wall by screws — the base can be separated from the camera by unscrewing.
Step 3: Resemble the camera and set the angle of viewing (the Hemisphere is rotatable). Installation done.
Now, you can monitor the place on your TV. It’s simple, just choose the AV mode.
If your TV has two RCA video ports, you can install two cameras and then shift between TV, AV1, and AV2.
The camera is equipped with 48 infrared LEDs, so even in total darkness, it is still able to capture clear objects. Just the video becomes black and white.