1. Input devices:
A. SD card.
B. USB devices, such as U Disk, MP4 player.
2. Output modes and cables needed:
A. AV – AV cable (included)
B. YPbPr (YUV) – YUV cable (Included)
C. VGA – VGA cable. One end of the cable should be VGA Male, while the other depends on your HDTV port (http://www.tinydeal.com/index.php?main_page=ws_search_result&keyword=VGA%20CABLE&categories_id=)
D. HDMI — HDMI cable (http://www.tinydeal.com/index.php?main_page=ws_search_result&keyword=HDMI&categories_id=)
Step A. Connect a cable to the HD Media Player by putting the plug into the right port.
Step B. Connect the cable to your HDTV, again, right plug into the right port. It’s easy to pair them by colors and shapes.
Step C. Connect the media player to the power.
4. Some notes about installation:
A. If you want to enjoy videos in the YPbPr (YUV) mode, the whole YUV cable and the two audio plugs of the AV Cable should work at the same time.
B. VGA cable only transmits visual data, so you need to connect an audio equipment to the media player through the AV port.
C. When you enter the HDMI Mode, you’d better disconnect cables for the other modes, in case that electromagnetism causes problems in visual effect, such as flickering.
5. Using :
A. Turn on your HDTV.
B. Turn on the HD media Player by remote control (connecting it to power does not mean it has been turned on).
C. Use the media player’s remote control to choose the output mode (one of AV, YUV, VGA, AND HDMI)
D. Press the signal source button on your HDTV remote control and choose the same mode you’ve chosen on the media player.
E. Use the media player remote control to modify settings like resolution.
F. If you want to watch videos right now, choose movie – storage –vidoe file, then you can start enjoy.
G. If you want to shift the output mode, return to the menu, press the button for new mode on Media player remote control, and then use HDTV remote control to enter the new mode.
6. Some Buttons in Common Use: